How to Connect Soundbar to PC

If you spend a lot of time-consuming media on your computer, you might have realized how tinny and low-quality the speakers built into monitors are. Computer speakers are one solution, but they often leave you with cables everywhere. you might be surprised to understand that during a few quick steps you’ll connect a soundbar to your computer.

If you spend tons of time-consuming media on your computer, you might have realized how tinny and low-quality the speakers built into monitors are. Computer speakers are one solution, but they often leave you with cables everywhere. you might be surprised to understand that during a few quick steps you’ll connect a soundbar to your computer.

The good news is, you’ve got a couple of options here. and therefore the install is pretty simple . If you’ll find an honest spot for the sound bar itself (maybe under the monitor if it is a “base” style soundbar or maybe hung under the desk), then connecting to the PC are going to be a breeze.

f you would like to urge a touch more clock out of your system you would possibly want to think about adding a Sub woofer to the soundbar (our guide), but that’s another topic for you to think about after you get your soundbar attached .

Table of Contents

AUX Out (Using a 3.5mm Jack)

This is by far the only and commonest way your computer will interface with a soundbar. latest laptops still have a 3.5mm AUX out jack (though some are getting to USB connectors only). And custom-built computer rigs usually have a 3.5mm port on the case albeit there isn’t a sound card installed.

If your rig features a 3.5mm jack, then connecting to a soundbar is as simple as running a 3.5mm male-to-male cable between the 2 devices. If you connect your computer and don’t immediately hear sound, make sure the computer’s volume is up, the default playback device on your computer is about to the soundbar, which the soundbar is about to the AUX input.

If the sole AUX cable you’ve got available came with a group of headphones, it’s likely a touch short for your purposes. So, rest assured that there are many long, reliable 3.5mm cables that you simply can get just like the DuKabel 26 Foot Audio Cable (on Amazon). And if your laptop only features a USB-C port, there are many USB-C to three .5mm cable options also (also on Amazon).

Bluetooth

If you built your computer yourself, it’s less likely that it’s a Bluetooth-out option. but , if you built the rig yourself you’ll already know this since it means you either did or didn’t buy a Bluetooth card and install it on the motherboard.

Laptops, though, have Bluetooth almost as a typical at now . It’s hard to seek out one that doesn’t have Bluetooth that “just works” pre-installed.

Navigate to your computer’s Bluetooth settings, where you’ll see an inventory of devices that the PC can see broadcasting a Bluetooth signal. Then, put your soundbar in pairing mode, and choose it from the list.

At now , the soundbar should make an audio chime that it’s connected, and if the PC doesn’t automatically route the audio there you’ll click the speaker symbol within the bottom right corner and confirm the soundbar is chosen because the audio-out option.

HDMI

If you’re first thought here was that you wanted to send audio to your soundbar, not video, you are not wrong. But HDMI, it seems , is not just for the video signal. you’ll also use it to send only the audio channel somewhere.

This is really helpful during a situation like this, during which you will probably still want to use the screen that your computer is attached to for watching things. Once you’ve got the soundbar placed, simply connect it to the PC via HDMI, then open up your computer’s audio settings.

Because your computer probably isn’t expecting you to require to separate things this manner , it’s going to take a couple of clicks to form sure the audio is routed to the soundbar. do not be surprised if there’s an audio option that does not reference a speaker in the least , and is simply described as “HDMI.”

Digital Optical Audio (“Optical” or “SPDIF” Cables)

This is the rarest option, but you’ll indeed have a SPDIF or “optical out” port on your computer. High-end PCs that cost quite a couple of grand, or custom units with expensive sound cards are more likely to possess this feature .

However, the small print here are an equivalent because the AUX out 3.5mm option: simply get an optical cable which will reach from the soundbar to the pc and plug them both in. Double-check the computer’s audio out setting if you don’t hear anything immediately.

Also, if you’re having various issues with digital optical, you ought to check if the sound card’s drivers are properly installed.

Connecting using Optical

If you’ve got a custom computer speaker system or surround sound setup with sound cards, then you would possibly see SPDIF cables as an option. they’re almost like a Toslink or regular digital optical cable and have an easy setup.

You’ll need to connect the optical cable or the digital audio cable into the proper ports on both your PC and your soundbar. It might be labeled as “Digital Audio Out”. Once securely plugged in, it’s good to regulate your preferences. If you’re still experiencing a drag or two with the output, double-check the sound card. The sound card drivers should be properly installed.

Aside from Toslink, some soundbars even have a USB connection that make it easy to line up. These soundbars simply connect to the USB port, so it’s powered by the pc itself.

Sound requirements for Network Audio

Whether you’ve got an On soundbar or a Sony TV soundbar, once you hook it up to your computer, the expectations are lowered. this is often thanks to how close one usually sits to the screen, and therefore the smaller size of the soundbar needed to supply top quality audio.

How to Connect Soundbar to PC

Leave a Reply

Scroll to top