How to Turn on Remote Desktop Using Regedit

Enabling Remote Desktop remotely requires some sidestepping, but it’s possible. As long as you’ve got administrator access to the remote computer, you’ll enter its registry and switch on Remote Desktop from there.

Method 1: Graphical Interface

By far the easiest way is to enable RDP through the graphical interface.

  • Launch System Properties and click on Remote Settings within the left pane.
  • Choose the Allow remote connections to the present computer radial button.
  • Click Select Users to feature users to attach via RDP.

NOTE: By default the local Administrators group are going to be allowed to attach with RDP. Also the user that’s currently logged in also will be allowed to attach .

Click okay to close the interface, RDP is now enabled on the compute.

NOTE: Enabling RDP through the GIU also will configure the Windows Firewall with the acceptable ports to permit RDP connections.

NOTE: To Disable Remote Desktop select the Don’t allow remote connections to the present computer radial button.

Method 2: Registry

To enable remote desktop by directly editing the registry use the subsequent steps:

Launch the registry editing tool by typing REGEDIT within the run.

Navigate to the subsequent node: HKEY_LOCAL_MACHINE\SYSTEM\CurRentControlSet\Control\Terminal Server

Select the fDenyTSConnections Name

Change the info Value from 1 to 0, select OK.

NOTE: Enabling RDP through the registry won’t configure the Windows Firewall with the acceptable ports to permit RDP connections.

Type the subsequent in an administrative command prompt:

Netsh advfirewall firewall set rule group=”remote desktop” new enable=yes

Netsh advfirewall firewall set rule group=”remote desktop” new enable=yes

NOTE: By default the local Administrators group are going to be allowed to attach with RDP. Also the user that’s currently logged in also will be allowed to attach .

NOTE: To Disable Remote Desktop select enter 1 rather than 0.

Method 3: command line

To enable RDP with the command prompt, use the subsequent steps.

Launch the command prompt as Administrator.
Type the subsequent command:

Reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurentControlSet\Control\Terminal Server” /v fDenyTSConnections /t REG_DWORD /d 0 /f

  • Reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurentControlSet\Control\Terminal Server” /v fDenyTSConnections /t REG_DWORD /d 0 /f

NOTE: Enabling RDP through the command prompt won’t configure the Windows Firewall with the acceptable ports to allow RDP connections.

Type the following:

Netsh advfirewall firewall set rule group=”remote desktop” new enable=yes

  • Netsh advfirewall firewall set rule group=”remote desktop” new enable=yes

NOTE: By default the local Administrators group are going to be allowed to attach with RDP. Also the user that’s currently logged in also will be allowed to attach .

To disable RDP with the command prompt, use the subsequent steps.

Launch the command prompt as Administrator.
Type the subsequent command:

Reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurRentControlSet\Control\Terminal Server” /v fDenyTSConnections /t REG_DWORD /d 1 /f

  • Reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurRentControlSet\Control\Terminal Server” /v fDenyTSConnections /t REG_DWORD /d 1 /f

Method 4: Using PowerShell

To enable RDP with the PowerShell, use the subsequent steps.

Launch PowerShell as Administrator.
Type the subsequent command:

Set-ItemProperty -Path “HKLM:\System\CurrentControlSet\Control\Terminal Server” -Name “fDenyTSConnections” –Value 0

  • Set-ItemProperty -Path “HKLM:\System\CurrentControlSet\Control\Terminal Server” -Name “fDenyTSConnections” –Value 0

NOTE: Enabling RDP through the command prompt won’t configure the Windows Firewall with the acceptable ports to permit RDP connections.

Type the following:

  • Enable-NetFirewallRule -DisplayGroup “Remote Desktop”

NOTE: By default the local Administrators group are going to be allowed to attach with RDP. Also the user that’s currently logged in also will be allowed to attach .

To disable RDP with the PowerShell, use the subsequent steps.

Launch PowerShell as Administrator.
Type the subsequent command:

Set-ItemProperty -Path “HKLM:\System\CurrentControlSet\Control\Terminal Server” -Name “fDenyTSConnections” –Value 1

  • Set-ItemProperty -Path “HKLM:\System\CurrentControlSet\Control\Terminal Server” -Name “fDenyTSConnections” –Value 1
How to Turn on Remote Desktop Using Regedit

Leave a Reply Cancel reply

Scroll to top
Exit mobile version